Heating system for Kathrein antenna 120cm - CAS120

087028 

HSA-CAS120gr

Antenna 125cm - graphite - incl. heating (675W) and ZAS120

087026

HSA-CAS120ws

Antenna 125cm - white - incl. heating (675W) and ZAS120  

Heating system for Gibertini antenna 125-150cm - OPV125x & OPV150L

087006 

HSA-125-A

Antenna 125cm - graphite - incl. heating (670W)

087007

HSA-125-L

Antenna 125cm - white - incl. heating (670W)

087025

HSA-150-L

Antenna 150cm - white - incl. heating (670W)  

Heating system for GRP Antenna 180cm - OP180

087029 

HSA-180-L

Antenne 125cm - graphite - incl. heating (800W)

Control unit - universal

HSA1650

Universal controler for heated SAT-antennas.

The temperature and the humidity is monitored. When the preset value is reached the heating systems starts working. The system is runing until there is no more humidity or the temperature rises.

The heating systems runs only, when there is humidity and a temperature which is lower then the preset value. This reduces the energy consumption to a minimum.

The control unit works with all antenna heating systems. Two antenna heating systems could be connected. The maximum total power is 1600VA.

Technical data HSA1650

• On/Off-temperature - ajdustable from 0...+8°C

• Preset temperature display - LED 7-segment

• Power indikator - LED (red) = heating system on

• Temperature and humidity sensors with 3m silicon cable

• Power supply 230V~/50Hz

• Potential free relais max. 24V/2A

• Power consumption- approx. 4VA

• Housing - plastic, splashproof IP54

• Weight / housing: 1kg / 180 x 94 x 81mm
  Optional:

• Feed heating system 18V~/1,4A with 3m silicon cable

Feed heating system

An universal Offset-feed (40mm diameter and C 120 Flansch) is heated via heating cartridge (26W).

Due tue the feed heating systems there is no snow and ice deposition on the feed. The feed heating will be switched on and off concurrently with the antenna heating.